Bonnet and Poppet Assembly Repair Kit Febco 905-211 1/2"-3/4" for 765CBV 765DBV

Description

Overview
905-211 1/2"-3/4" Bonnet and Poppet Assembly Repair Kit,Combines Bonnet Assembly Kit 905-047 and Poppet Assembly Kit 905-049,Compatible with Febco Model 765-050(765CBV) & 765-075(765DBV) -1/2"-3/4".
Kit Includes:
1 x Bonnet
1 x O-Ring
1 x Spring
1 x E-Ring
1 x Washer
1 x Stem
1 x Rubber Disc
1 x Poppet
Excellent quality
Lightweight, hard, durable plastic, stainless steel and pure brass materials are used to ensure that the valve cover repair kit and poppet valve repair kit are durable and protect your water supply system for a long time.
Easy to install
Like the original, it can be easily reassembled in the order of disassembly. No special tools are required for maintenance.
High cost performance
You can get accessories that exceed OEM standards at a low price to serve your water supply system and save money for yo
ur family.
Replace the bonnet and poppet valve
1.
Close the bottom valve handle and turn it to the level to close the water outlet;
2.
Unscrew the small nut on the bell, and open the bell;Open the plastic bonnet and remove internal debris. There should be no plastic fragments inside the device.
(
special attention: do not remove the metal piece at the bottom of the reset device to prevent the spring u
nder it from hurting you
);
3.
Replace with new bonnet and poppet valve kit and tighten by hand;
4.
Place the bell on top of the metal screw, and then tighten the small nut. Be careful not to tighten it too tightly, just twist it by hand, just to fix the metal bell on the device, and keep a certain tension.
***
Reminder: In order to avoid replacing the bonnet and poppet valve again, if the temperature continues to be low and freezing, please cover the backflow prevention device with a blanket or heat preservation bag.