Motorola XTS5000 700/800 MHz FPP P25 Free Flashcode Programming Includes Antenna

Description

Motorola XTS5000 700/800 MHz Model 3 currently flashed for FPP and user programmable scan.
Radios are in good condition. They are used with some scratches and scuffs but work perfectly. Includes a used/good condition 800 MHz whip antenna as shown.
Battery not included
. If you'd rather have a different flashcode let me know what flashcode number you prefer and I will program it for you. Keep in mind that with the XTS series you can only have either FPP or trunking you cannot do both. I do not program trunked systems. Send me a message if you have any questions.
Model: H18UCH9PW7AN
Firmware: R20.50.07
DSP: R19.50.01
No UCM included.
Flashcode: 5A0001-101306-4
Q806: ASTRO IMBE Digital Operation
H14: Enhanced Digital ID Display
Q52: Federal Government FPP
Q498: Hardware Multikey Encryption w/ OTAR
H35: Conventional Systems Operation
G857: FDNY Emergency Rx/Tx Tone Set
Q947: APCO Packet Data Interface
Q53: FCC FPP And Radio Cloning
Q387: Conventional Voting Scan
Q446: Fireground Voice/Channel Announcement
Q667: ADP Software Encryption
Default FPP programming is as follows: You'll have 15 zones of 16 channels each that you'll be able to program from the keypad. I've also enabled a user programmable scan list so you can program the list via the PROG menu option. The scan list can contain a maximum of 15 channels. If you would rather have 1 separate list per zone let me know so I can set it up that way for you.
Buttons and switches programmed as follows:
Top Concentric Switch: Scan On/OFF
Top ABC Switch: A: Keypad Lock B&C: Keypad Unlocked
Top Orange Button: Volume Set Tone
Top Side Purple Button: Monitor
Middle Side Button: Nuisance Delete
Bottom Side Button: TalkAround/Direct
Menu Options: ZONE FPP BATT MUTE CLCK CLON PROG VIEW PWR TXIN NUIS
If you want anything changed just let me know and I will program it accordingly for you. Thanks for looking.